FIN PLATE FIN PLATE SHEAR CONNECTION DESIGN | DETAILING | S18
The modules make the following assumptions: The centre line of the beam and column are in the same plane The connection transmits end shear only Bolts have normal clearance holes All bolts have threads in their shear planes
The module allows you to enter I or H-sections and orientations with the relevant design loads. The layout of the bolts on the connecting member is defined by entering their number and spacing. The module also provides automatic bolt sizing and spacing options to quickly get a workable bolt layout. To verify that you have defined the connection geometry as you intended, the module lets you view it from several angles either using dimensioned elevations or the 3D view.
After the analysis you can view the design output on a Calcsheet with the complete design calculations.
Supported Codes
Design Codes
• • • • •
AISC - 1999 LRFD AISC 360-16 LRFD AS 4100: 2020 BS5950 – 1990 BS5950 – 2000
• • • •
CAN/CSA – S16.1-94 Eurocode 3 – 2005 SABS 0162 -1984 SABS 0162 – 1993
Powered by FlippingBook