PILE BEARING CALCULATE THE BEARING CAPACITY AND DESIGN REINFORCED CONCRETE PILES GEOTECHNICAL | E14
Summary Pile Bearing can calculate the bearing capacity of piles considering the effects of pile length and diameter, installation type and soil conditions.
What makes this module special?
• Circular and Square pile design • Graphical output • Analysis results grouped on a Calcsheet
Detailed Description Pile Bearing can calculate the bearing capacity of piles considering the effects of pile length and diameter, installation type and soil conditions. The load transfer functions comprise two components: a side shear transfer function and an end bearing transfer function.
f= 11.90 kPa Very Dense Sand
2.00 m
2.00 m
f= 18.03 kPa Soft Clay
6.00 m
f= 200.00 kPa Very Soft Rock
7.50 m
f= 400.00 kPa Soft Rock
9.00 m
An analysis output table provides a summary of the friction and end bearing forces for each layer, for the allowable pile capacities, as well as the totals. A summary of the SLS and ULS settlements is also given. Additionally, the pile capacity vs pile length and the pile load vs deflection graphs are plotted.
Powered by FlippingBook