RECTANGULAR COLUMN DESIGN OF RECTANUGLAR REINFORCED
CONCRETE COLUMS DESIGN | DETAILING | C11
Summary Rectangular Column designs solid rectangular concrete columns subjected to axial forces and bi-axial bending moments. The simplified design approach set out in most codes is used for the design. The module can be used independently, or as a Design Link from Sumo . The Design Links automate data entry by linking analysis results and geometry with the design module.
What makes this module special?
• Automated bending schedules • Axial forces and bi-axial bending are considered for the design • Groups of columns analysed in Sumo can be linked into these modules for rapid design and detailing
RECTANGULAR COLUMN DESIGN OF RECTANUGLAR REINFORCED
CONCRETE COLUMS DESIGN | DETAILING | C11
Detailed Description Design and detail solid rectangular concrete columns. Columns can be short or slender in one or both directions, and different fixity conditions at the bottom and top. You can enter multiple load cases comprising of axial loads and moments about one or both axes at the bottom or top of the column. The module compiles column design charts and provides complete design calculation sheets. Generating reinforcement bending schedules is easy; the main bars and the stirrups can be customised. You can open the bending schedules in Padds or Probar 2D for final editing and printing. Theory used in this module The design codes give simplified procedures for designing columns of which the ratio of the larger to the smaller dimension does not exceed 1:4. The procedure used for the design of rectangular columns is applied to the design of circular columns. The reinforcement layout is assumed to be symmetrical.
RECTANGULAR COLUMN DESIGN OF RECTANUGLAR REINFORCED
CONCRETE COLUMS DESIGN | DETAILING | C11
Workflow Columns and their applied loading and properties can either be defined in the module or imported from Sumo .
Comments For columns of general shapes see General Column .
Supported Design Codes
Design Codes
• • • • • • • • • •
• • • • • • • • • •
ACI 318 - 1999 ACI 318 - 2005 ACI 318 - 2011 ACI 318 - 2014 AS 3600 - 2001 AS 3600 - 2009 AS3600 - 2018 ACI 318 – 2019 BS 8110 - 1985 BS 8110 - 1997
CP 65 - 1999
CSA A23.3-04 - 2010 CSA-A23.3:2019 Eurocode 2 - 2004 HK Concrete – 2004 HK Concrete - 2013
IS:456 - 2000 NZ 3101 – 2006
SABS 0100 – 2000 SP 63.13330.2018
Page 1 Page 2 Page 3Powered by FlippingBook